| Last Modified: 11-29-2007 | 1.6 J | |
| Service Category: Vehicle Exterior | Section: Window/Glass | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F6R000X |
| Title: WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: DESCRIPTION (2008 Sequoia) | ||
|
All Power Windows does not Operate with Door Key Cylinder |
DESCRIPTION
When the driver door key cylinder (key linked switch) is turned, the following occurs: 1) the door lock motor receives the signal; 2) the main body ECU sends the signal to the power window regulator motor; and 3) the power window motors are activated.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK LIN COMMUNICATION SYSTEM |
(a) Check for LIN communication system DTCs related to the power window control system.
OK:
LIN communication system DTCs are not output.
|
|
2. |
CHECK DTC (B2312) |
(a) Check if DTC B2312 is output
.
OK:
DTC B2312 is not output.
|
|
3. |
READ VALUE USING TECHSTREAM (DOOR LOCK SWITCH) |
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) According to the display on the Techstream, read the Data List.
Main Body
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Door Key SW-Lock |
Door key linked lock switch signal / ON or OFF |
ON: Driver side door key cylinder turned to lock position OFF: Driver side door key cylinder not turned |
- |
|
D Door Key SW-UL |
Door key linked unlock switch signal / ON or OFF |
ON: Driver side door key cylinder turned to unlock position OFF: Driver side door key cylinder not turned |
- |
OK:
On the Techstream screen, each item changes between ON and OFF according to above chart.
|
|
4. |
CHECK POWER WINDOW MANUAL FUNCTION |
(a) Check that the manual UP/DOWN function using the power window regulator switch can operate the front door power window LH and RH
.
|
|
|